Corrugated Cardboard Machinery

Corrugated Cardboard Machinery

Corrugated Board Production Line

★ Corrugated Cardboard Production Line is the professional equipment for producing corrugated cardboard. The 3ply, 5ply, 7ply and multi-function corrugated cardboard production line mainly consist of the following equipment: Mill Roll Stand, surface paper (core-paper) pre-heater, single facer, Conveying Bridge, Glue Application Machine, Double Facer, Slitter Scorer, Cut-off, Conveyer and Stacker, Heating System, Air compression system and Glue Making System, etc.

JC-320/360 Cassete Single Facer

★ Main flute roller:¢360mm(according flute differ),pressure roller¢415mm,preheat roller¢400mm.
★ Using negative pressure type design, low heat loss,helps the core paper to press evenly and close to the surface of corrugated roller, make the corrugate molding better, pressure uniform, the top of corrugate can glue uniform and better, make the single corrugated paper have perfect laminating.

JC-Full Hydraulic Mill Roll Stand

★ Adopt hydraulic drive to complete the paper clamping, loosen, remove for the medium, translation left and right and others,the lifting of the paper adopts hydraulic drive.
★ Brake adjustable adopts multipoint braking system.

JC-Thin Blade Slitter Scorer

1. MAX working width: 2200mm
2. Operation direction: left or right (Determined in accordance with customer plant)
3. The highest machinery speed: 150m/min
4. Mechanical configuration: Zero pressure line thin blade slitter scorer, 6 knives 10 lines

JC-280/320 Type Fingerless Single Facer

★ It adopts a hood suction type structure and is equipped with a high pressure powerful fan. Suction with silencer, air source and electrical control are concentrated in the same operation cabinet, not less than 1.5 meters from the host, and the operating side is fully enclosed.
★ Wall panel cast iron structure, wall panel thickness 130mm.

JC-Electrical Mill Roll Stand

1. Max. diameter of reel paper: φ1500mm.
2. Expiry Width: 1400mm-1800mm-2200mm.
3. Reel paper lift-lower, clamp, loosen, movement, contraposition, operated by motorize.
4. Reel strain control by manual brakes or pneumatic brakes. The finial adopts taper style or bulge style.

JC-Full-automatic Splicer Machine

1. Maximum working width: 1400-2200mm.
2. Operating direction: left or right (depending on customer's plant).
3. Maximum mechanical speed: 150m/min.
4. Operating speed: 0-150m/min.


★ The preheating roller meets the national standard of a class of pressure vessels, and is accompanied by a pressure vessel certificate and inspection certificate.
★ The surface of each roller is precision ground and polished with hard chrome plating. The surface friction is small and durable.

JC-20 Gluing Machine

★ After the surface of cots is adjusted and tempered, the inner hole is processed, the dynamic balance surface is polished and there are 32 lines of concave net pattern, the glue is uniform and the amount of glue consumption is less.
★ The rotation of the cots is controlled by the variable frequency motor and frequency conversion, and the frequency control ensures that the linear speed of the cots is synchronized with the two sides, and it can operate independently.

JC-Computer Thin Knife Slitting and Creas

★ Adopts novelty thin edge high speed paper cutting, theincisions are level up and velvet.
★ Auto-grinding edge system can be realized in the processof production, non-stop machine grinding edge, Pneumaticcontrol grinding edge set. according to material andcondition of hem, set the interval meter and the grindingtime at any moment.