ZYKM-A series (roller to roller transmission printer series )
★ Keyless conntection ring to reduce center wear ,imaginary magnification .to maintain longterm printing registration .
★ Lubricate oil balancer : to keep the unit lubricating oil on the same level .
★ The whole machine computer control ,PLC touch screen
★ Computer remote maintenance
★ Each unit equippment alarm bell and emergency stop bottom
- Commodity name： ZYKM-A series (roller to roller transmission printer series )
- Commodity ID： a5
● Control on the main console and each unit console with display adjustment system, store repeated order, easy for operation.
● Motorized printing plate mounting,auto reset, quick change.
● Each unit is equipped with Emergency Stop switch to ensure safety operation.
● Motorized gap adjustment device for ease operation.
● Transmissions are using precision high hardness gears with spraying type circulating lubrication system.
● Electric element,bearing,and pneumatic element all us international brand.
Maximum speed(piece/min) 250 200 150 150 120 150 120 120 Paper feeding precision ( mm ) ±1.0 ±1.0 ±1.0 ±1.0 ±1.0 ±1.0 ±1.0 ±1.0 Maximum feed size ( mm ) 900×2100 1200×2500 1200×2900 1400×2500 1400×2900 1600×2500 1600×2900 1600×3300 Minimum feed size ( mm ) 280×600 350×600 350×600 400×600 400×600 450×600 450×600 450×600 Size of drawing paper ( mm ) 1200×2100 1500×2500 1500×2900 1700×2500 1700×2900 2000×2500 2000×2900 2000×3300 Maximum printing area ( mm ) 900×2000 1200×2400 1200×2900 1400×2500 1400×2900 1600×2500 1600×2900 1600×3200 Printing set ( mm ) ±0.5 ±0.5 ±0.5 ±0.5 ±0.5 ±0.5 ±0.5 ±0.5 Thickness of standard printing plate ( mm ) 5mm 5mm 5mm 5mm 5mm 5mm 5mm 5mm Minimum slotting interval (mm) Positive knife 140×140 140×140 140×140 140×140 140×140 140×140 140×140 140×140 Scalpel 215×70 215×70 215×70 215×70 215×70 215×70 215×70 215×70 Maximum groove depth ( mm ) 225 300 300 350 350 400 400 400 Slotting accuracy ( mm ) ±1.5 ±1.5 ±1.5 ±1.5 ±1.5 ±1.5 ±1.5 ±1.5 Die cutting precision (mm ) ±1.5 ±1.5 ±1.5 ±1.5 ±1.5 ±1.5 ±1.5 ±1.5
* Subject to change and improvement without notice.
Lead feeder unit
★ Paper feeding can be continuous or skip paper ( with counter).
★ It adopt the lead edge roller to feed ,can adjust the route ,to ease the pressure on drawing paper roll.
★ Lead edge feeding increase the section flow rate to meke feeding smoothly and accuracy.
★ Frequency conversion control vacuum alir flow and pressure, to match the board size.
★ Paper feeding rubber roller with soft inner and outer hard, keep the inner elastic and guarantee the surface wear resistance, reduce the cardboard was be squashed to be be sent in.
★ Dust cleaning device:The brush and blower to remove cardboard surface confeti.Multiple fan stralight smoke added electrostatic brush and tuming round brush, the grealest degree remove dust board surface.
★ About paper roller clearance, the position of the left right bar is adjusted by computer.
★ Equipped with brush device to sufficiently eliminate dust and scraps as well as forelign substances on the printing surface and to improve printing quality.
★ Scroll hanging version,locking 360 degrees, let operation of hanging plate is simple, more accurate registration.
★ Changing plate quickly,it can fix the incline error when paste the plate, 80 that reach to the range of amendment.
★ Adopting vacuum absorb and high precision to convey, high Printing precision.
★ The fixed group be wlden in printing unit,t can help dry the ink, to guerantee the printing precision.
★ Printing roll phase adopt servo motor to drive,can connect to the Endat high precise encoder,guarantee the control precision of the servo drive system, topping-control contact to the servo directly, quick response and high precision.
★ The transverse phase ,computer and electric- -digital control.
★ Imported brand scraper ink system: ink cavily body for non- -metal material, special never rust, easy to clean;Rapid change around the blade.
★ Adopt automatic cleaning - switching device Let the ink recycling more thoroughly and save the ink,when clean or change the color of the ink,can save ink 0.4- 0.5kg per unit once.
★ Pre -pressing device; Electically couped slotting and cutting and prepressing
★ Automatically adjusted group data setting with frequency converter revision to ensurehigh precision.
★ Manually adjusted scoring wheel clearance with adjustment data displayed on the dial.
★ 7mm alloy steel scoring knives with indent heat treatment to enable grinding teeth shaip edge and high precislon.
★ PLC, touch screen and motorized digital 360degree adjustment adopted lorm solting phase with order being able to stored.
★ Additional portable orfice dile backer.
★ Equlpped with the inerlock control switch at slotting unit to achieve stop orresumepaper feed,
Die cutting unit
★ With the servo motor drive,guarantee the shake of printing unit is few,to make print accurate.
★ Rubber gasket roll compensation is controlled by independent motor drive, rubber mat roller speed, compensation scope±3.5 mm, make the rubber gasket roller and die cutter roller speed is consistent.
★ Rubber gasket roll machine screw reversing 50 mm winding device, improve the service life of the rubber gasket.
★ Transverse phase, computer and electric control, digital control in the plus or minus 10 mm
★ Die-cutting phase adjustment by PLC, servo drive.
★ The structure of the rubber gasket roller, keep the rubber gasket surface lis fiat and level.
NOTE: Please leave your email, our professional person will contact you asap!