Corrugated Cardboard Machinery
★ Corrugated Cardboard Production Line is the professional equipment for producing corrugated cardboard. The 3ply, 5ply, 7ply and multi-function corrugated cardboard production line mainly consist of the following equipment: Mill Roll Stand, surface paper (core-paper) pre-heater, single facer, Conveying Bridge, Glue Application Machine, Double Facer, Slitter Scorer, Cut-off, Conveyer and Stacker, Heating System, Air compression system and Glue Making System, etc.
★ Main flute roller：￠360mm（according flute differ），pressure roller￠415mm，preheat roller￠400mm.
★ Using negative pressure type design, low heat loss，helps the core paper to press evenly and close to the surface of corrugated roller, make the corrugate molding better, pressure uniform, the top of corrugate can glue uniform and better, make the single corrugated paper have perfect laminating.
★ Adopt hydraulic drive to complete the paper clamping, loosen, remove for the medium, translation left and right and others，the lifting of the paper adopts hydraulic drive.
★ Brake adjustable adopts multipoint braking system.
2. Operation direction: left or right (Determined in accordance with customer plant)
3. The highest machinery speed: 150m/min
4. Mechanical configuration: Zero pressure line thin blade slitter scorer, 6 knives 10 lines
★ It adopts a hood suction type structure and is equipped with a high pressure powerful fan. Suction with silencer, air source and electrical control are concentrated in the same operation cabinet, not less than 1.5 meters from the host, and the operating side is fully enclosed.
★ Wall panel cast iron structure, wall panel thickness 130mm.